Coin Cup

The Coin Cup is mounted on the base feeder motor unit.  It is an integral part of the feeder and must be present to properly sort coins. 

Coin Cups are a normal wear and tear part, just like the feed wheel. You can remove your coin cup by pressing down the red square slider tab on the left of your machine, and then push the coin cup “uphill” on the chrome lugs that hold it in place.  It will then come off for  inspection.   If after installing a new wheel you still are experiencing doubling coins under the feed wheel, you probably need a coin cup too.  Look on the bottom of the coin cup, note where the feed wheel slides against the coin cup, there will be a small witness line, or groove that is present.  If it is too deep, even with a new wheel it allows the wheel to tilt enough to double up coins.  Replace the Coin Cup

SHIPPING WILL BE ADDED TO ORDER OF $5.00